Effectiveness of a Water Disinfection Method Based on Osmosis and Chlorine Dioxide for the Prevention of Microbial Contamination in Dental Practices.

In dental clinics, the infections may be acquired through contaminated devices, air, and water. Aerosolized water may contain bacteria, grown into the biofilm of dental unit waterlines (DUWLs). We evaluated a disinfection method based on water osmosis and chlorination with chlorine dioxide (O-CD), applied to DUWL of five dental clinics. Municipal water was chlorinated with O-CD device before feeding all DUWLs. Samplings were performed on water/air samples in order to research total microbial counts at 22-37 °C, Pseudomonas aeruginosa, Legionella spp., and chlorine values. Water was collected from the taps, spittoons, and air/water syringes. Air was sampled before, during, and after 15 min of aerosolizing procedure. Legionella and P. aeruginosa resulted as absent in all water samples, which presented total microbial counts almost always at 0 CFU/mL. Mean values of total chlorine ranged from 0.18-0.23 mg/L. Air samples resulted as free from Legionella spp. and Pseudomonas aeruginosa. Total microbial counts decreased from the pre-aerosolizing (mean 2.1 × 102 CFU/m3) to the post-aerosolizing samples (mean 1.5 × 10 CFU/m3), while chlorine values increased from 0 to 0.06 mg/L. O-CD resulted as effective against the biofilm formation in DUWLs. The presence of residual activity of chlorine dioxide also allowed the bacteria reduction from air, at least at one meter from the aerosolizing source.

In Vivo Study of Aerosol, Droplets and Splatter Reduction in Dentistry.

Oral health care workers (OHCW) are exposed to pathogenic microorganisms during dental aerosol-generating procedures. Technologies aimed at the reduction of aerosol, droplets and splatter are essential. This in vivo study assessed aerosol, droplet and splatter contamination in a simulated clinical scenario. The coolant of the high-speed air turbine was colored with red concentrate. The red aerosol, droplets and splatter contamination on the wrists of the OHCW and chests of the OHCW/volunteer protective gowns, were assessed and quantified in cm2. The efficacy of various evacuation strategies was assessed: low-volume saliva ejector (LV) alone, high-volume evacuator (HV) plus LV and an extra-oral dental aerosol suction device (DASD) plus LV. The Kruskal-Wallis rank-sum test for multiple independent samples with a post-hoc test was used. No significant difference between the LV alone compared to the HV plus LV was demonstrated (p = 0.372059). The DASD combined with LV resulted in a 62% reduction of contamination of the OHCW. The HV plus LV reduced contamination by 53% compared to LV alone (p = 0.019945). The DASD demonstrated a 50% reduction in the contamination of the OHCWs wrists and a 30% reduction in chest contamination compared to HV plus LV. The DASD in conjunction with LV was more effective in reducing aerosol, droplets and splatter than HV plus LV.

[Strategy of dental clinics to cope with the epidemic period of infectious diseases based on the experience of corona virus disease outbreak].

The outbreak of corona virus disease (COVID-19) has raised concerns among dentists to develop strategies to prevent infection of dental equipment, materials, and patients during an epidemic period. Strategies following the National Laws and Standards of China and local standards of several provinces for controlling cross-infection and instituting protective measures for medical staff in dental clinics during an epidemic period are discussed. A proposal is put forth for dental clinics that will face similar situations in the future. Further research is warranted to address potential problems that will be encountered under such dire circumstances.

Droplet Sizes Emitted from Demonstration Electric Toothbrushes.

The COVID-19 pandemic has drawn attention to microbial transmission risk via aerosols in dental practice. Demonstration electric toothbrushes are used intra-orally for education. The aim of this investigation was to measure the size of droplets emitted by the brush head of two demonstration oscillating-rotating electric toothbrushes. Measurement of droplet production and size was recorded in vitro using three methods: (1) Malvern Spraytec (LASER particle size measurement device with detectable particle size of 0.1-2500 µm) and brushes mounted on a 3D-printed, two-shell form-fit fixture with a supply of tap water; (2) a DustTrak aerosol measurement device and toothpaste slurry, with brushing simulated in the oral cavity of a phantom head; (3) high-speed visualization in a simulated-use situation in the oral cavity of a phantom head, with individual evaluation of tap water, water with detergent, 70% ethanol, glycerin and toothpaste slurry. Both brushes showed the size of emitted droplets was consistently between 200 and 1200 µm, categorized as splatter (dental aerosols are <50 µm diameter). No significant incremental aerosol-sized matter was detected during toothbrush operation. The high-speed video visualization confirmed only splatter-sized droplets during operation. These findings indicate that oscillating-rotating toothbrushes do not produce aerosol-sized particles during simulated use.

Risks of Aerosol Contamination in Dental Procedures during the Second Wave of COVID-19-Experience and Proposals of Innovative IPC in Dental Practice.

Dental-care workers operate very close to the patient's mouth and are at high risk of contamination by SARS-CoV-2. Droplets may be contaminated by patient's saliva and exhaled breath particles. All asymptomatic patients should be considered as Coronavirus positive. All dental procedures must be revised after positive identification of SARS-Cov-2. Novel recommendations as the use of novel suction cannula designed for fast spray/saliva aspiration, use of Tyvek suits and innovative sprayhoods designed for dental-care worker protections are proposed to prevent virus transmission. New tailored operative and clinical procedures are being currently developed by university dental clinics and hospitals in attempt to reduce risk for dental workers and patients.